Tag Archives: Airmix

2013 AWFS Woodworking Tradeshow

header-infoEXEL North America, Inc. – Kremlin Rexson is exhibiting in booth 4239 at the 2013 AWFS Woodworking Fair. The show will be held at the Las Vegas Convention Center located in Las Vegas, Nevada on July 24 – 27, 2013.

Please register today to join us for this exciting event!

Please click on the link below to register to attend 2013 AWFS:
2013 AWFS Registration

Exhibit Hall Pricing:
Register By June 29, 2013 – $25
Register After June 29, 2013 or at the event – $50

We would like to invite you to visit our booth to see our New Kremlin EOS Finishing Systems, PU3000 Electro-Mechanical 2k System, Cyclomix™ Micro Meter Mixing System, Xcite™ Airmix® Manual Spray gun, and other manual and automatic application equipment.

We are also promoting our “Spray Before You Pay” Program that allows you to TEST DRIVE the best spray equipment on the market before you actually buy it.

We will also be demonstrating the benefits of using Kremlin Airmix® versus conventional spray technology. You will see the significant benefits of using Airmix® over conventional spray technologies – You will be amazed!

Introducing our EOS Finishing System with Xcite™ Airmix® Manual Spray gun!

The EOS Finishing System and Xcite Airmix® Manual Spray gun will improve your finishing applications by:

*Delivering up to 86% Transfer Efficiency

*Reducing Material Cost up to 50%

*Delivering a Fine Quality Finish with Less Overspray

Visit us and see what our customers are saying about their proven savings!  Take advantage of our “Spray Before You Pay” program to test drive our newest products before you purchase them.

(Click on each product photo to view literature)


New EOS Finishing System with Xcite Airmix® Manual Spray gun


PU3000 Electro-Mechanical Mixing System


Xcite Airmix® Manual Spray gun

Cyclomix Micro Green

Cyclomix Micro Meter Mixing System

AVX gun

AVX Airmix® Automatic Spray gun


Kremlin Rexson Cyclomix™ Micro & EOS Pump Reduces Labor Costs & Increases Productivity for Major Kitchen Cabinet Manufacturer

EXEL North America worked with Olympic Kitchen, one of the largest kitchen cabinet manufacturers in the Greater Toronto area in Ontario, Canada, to reduce their labor and increase  production.  They have been a Kremlin Rexson customer for over 16 years. 

Olympic Kitchens discovered that their 2k materials were not being manually mixed properly. Therefore, they were looking to reduce labor time and simplify the process.  Their application consisted of an automatic  flat-line with a three-circuit Venjakob machine.

Olympic Kitchens offers custom finished kitchens with catalyzed materials.   They are currently using a 2K primer, colors, lacquer, and 1K sealer.  As part of their production process, they needed to make sure that the catalyst was being mixed properly.  Their existing equipment consisted of the Kremlin Rexson 16-120 pumps, Manual Airmix® & Airspray technology, and ATX guns for the flatline machine.

EXEL North America met with Olympic Kitchens and explained the advantages and benefits of upgrading their current Kremlin Rexson equipment to newly, innovative equipment that would reduce their need for manual labor and increase productivity in their facility.

To optimize Olympic Kitchens performance, EXEL North America was able to show how the CyclomixMicro would enable them to have a more precise control in mixing fresh 2k material  when they needed it.  This equipment also delivered timed flushing sequences and volume control.  EXEL North America installed the following Kremlin Rexson equipment into their facility:

  • Cyclomix™ Micro PH 3 + 1
  • 5 + 1 Color kit
  • (1) 20-25F PH for the catalyst
  • (2) 16-120F Kremlin Rexson Pumps
  • (2) 5 Gallon Agitators with lids
  • (3) 55 Gallon Agitators with lids
  • (1) 15c-25 EOS Pump for solvent
  • Airmix® regulators & filters for outbound pressures

EXEL North America was able to analyze their current situation and offer a more suitable solution that would deliver a better “Return on Investment” and reduce their labor costs.

Now, they have a 6-12 month ROI based on less personnel needed to manually mix the 2K materials.  There is no need to re-paint or touch-up because the material is now properly catalyzed.   Finally, the dedicated pumps for the (5) 2k colors deliver a quicker color change with increased productivity.

For more information or questions, please email us at exelnasolutions@exel-na.com or call us in the US at 1.800.573.5554 or in Canada at 1.800.450.0655. For product literature and brochures, please visit our website at www.exel-na.com.

Let EXEL North America help you increase your ROI today!  Give us a call!

Olympic Kitchen Cyclomix Micro PH 3+1 System

Olympic Kitchen Cyclomix Micro PH 3+1 System

Olympic Kitchens Pumping Systems

Kremlin Rexson Equipment Reduces Coating Waste for Major Kitchen Cabinet Manufacturer

EXEL North America partnered with one of the largest kitchen cabinet manufacturers in North America to reduce their coating wastes and improve finish consistency.  Due to production requirements, all 2K coatings needed to be accurately and freshly mixed with no down time during color change. This required a large quantity of 2K mixing machines to be installed at each spray booth.

The kitchen cabinet manufacturer’s application consists of hand spraying cabinets on an overhead conveyor.  They were using a hand mixing method and needed to improve their process as there was considerable paint waste and inconsistencies in the mix quality.  They are applying an acid catalyzed clear coat and pigmented base coats.  These coatings needed to be ready to spray at all times during production hours without any problems.  EXEL North America was able to eliminate the hand mixing process and improve the finish quality.

EXEL North America analyzed the process and offered a more suitable solution that would provide a better “Return on Investment” and reduce coating wastes.

To optimize the kitchen cabinet manufacturer’s performance and reduce their coating wastes, EXEL North America installed the following equipment into their facility:

  • (70+) Cyclomix™ Micro pH Machines
  • (100+) Airmix® fluid regulators
  • (10+) 20-220FPH and 20-25FPH catalyst pumps
  • (100+) Xcite® guns

EXEL North America was able to help the kitchen cabinet manufacturer reduce coating usage and waste and eliminate the manual labor associated with hand mixing.  For pigmented coatings, they expect an ROI within 12-15 months.  On clear coatings, they expect an ROI of 24-30 months.

EXEL NA is currently quoting additional 2K equipment for a few more of their locations.  We hope to continue to optimize their performance and reduce their coating waste by showing them the best options available by using the equipment that Kremlin Rexson manufactures.

The customer is so pleased with the performance of the Kremlin Rexson equipment that they have standardized this process at various locations throughout North America.

Kremlin Rexson is the world’s leading manufacturer of complete plural component equipment solutions for acid catalyzed coating applications.

For more information or questions, please email us at exelnasolutions@exel-na.com or call us at 1.800.573.5554.   For product literature and brochures, please visit our website at www.exel-na.com.

Kremlin Rexson Equipment


Kremlin Rexson Creates Paint and Labor Savings for Hydraulic Cylinder Manufacturer

EXEL North America worked with Monarch Industries located in Winnipeg, Canada to reduce their Work-In-Process Time  (WIP).   Monarch’s goal was to be the best manufacturer of hydraulic cylinders.

Monarch Industries application consisted of automatic hydraulic cylinder finishing with an overhead monorail conveyor system.  They were using manual Graco Electrostatic equipment and running three shifts with approximately 10 people per shift.  Monarch was producing 2000 cylinders per day  with varying batch sizes while each cylinder needed to be primed and top coated.  The primer was a one color 2k epoxy, and the top coat was a 2k urethane in various colors.

EXEL North America was able to analyze their current situation and offer a more suitable solution that would offer a better Return on Investment.  To optimize Monarch’s performance, create a long-term paint savings, and reduce the amount of labor, EXEL North America installed the following Kremlin Rexson equipment in Monarch’s facility:

  • 04-120 and 04-220 Flowmax® circulation pumping systems
  • AD-60 Paint Heaters
  • 55 Gallon Agitator and cover lifts
  • Two Cyclomix™ Experts for Primer (one manual and one auto)
  • Two Cyclomix™ Experts for Top Coat (one manual and one automatic)
  • Two Spraymium™ Primer Electrostatic spray guns for primer touch up
  • Two Spraymium™ Top Coat Electrostatic spray guns for top coat touchup
  • Primer automatic application system, RFV2400 dual axis reciprocator following system
    with three PPH308’s
  • Top Coat automatic application system with RFV2400 dual axis reciprocator following
    system with three PPH308

One of the reasons this was a success was because the RFV2400 system allowed us to only spray on the apex of the cylinders, which provided a much higher Transfer Efficiency rate than previous systems.  The system allows for rapid color change with fresh urethane at all times and we were able to control  the process with an RFID control system.

EXEL North America was able to help Monarch Industries save on their painting costs.  The paint costs went from $1.50 per average  cylinder down to $1.00 per cylinder.   With the new system in place, all cylinders are finished during one shift while the old system required three shifts with 10 people on each  shift.  In addition to paint costs savings, we were able to create a labor savings of approximately 20 people.

For more information or questions, please email us at exelnasolutions@exel-na.com or call  us at 1.800.573.5554.  For product  and brochures, please visit our website at www.kremlinrexson-sames.com

Monarch Industries New System


EAH Equipment Success with Painting Trailers and Drilling Rigs with Kremlin Rexson Equipment

Products Finishing did an article on the success story by the Kremlin Rexson distributor, EAH Equipment (Austin, TX).

Loadcraft switches to new paint system for drilling rigs.

When part-time oilman Terry McIver went to Brady, TX in 2004 to buy a used drilling rig, he was surprised to find the company he was visiting was going bankrupt. Brady left with the oil rig, but a few months later he went back and bought the company.
Article From: Products Finishing, Tim Pennington, Editor
Posted on: 4/1/2011

Loadcraft builds and paints trailers and rigs that must have a durable coat in often harsh weather conditions.

When part-time oilman Terry McIver went to Brady, TX in 2004 to buy a used drilling rig, he was surprised to find the company he was visiting was going bankrupt and had just two employees left from over 200 it had a year earlier.

Brady left with the oil rig, but a few months later he went back and bought the company.  Today, Loadcraft is booming as it designs and manufactures trailers and drilling rigs, some of which can cost $9 million.

But with a watchful eye on the economy and the mood swings of the oil industry, Loadcraft’s manufacturing department sought a better, more economical way to paint its trailers and rigs than what they had been doing.

“We wanted to get away from mixing everything by hand,” says Tim Perry, Loadcraft’s paint manager. “Let’s say there was a lot of human error involved.”

For example, they were using a zinc rich epoxy primer and a urethane topcoat on its mobile drilling rigs, but often saw much of the paint go to waste because of the hand mixing.

“It wasn’t efficient to mix six gallons and have two gallons left over that went to scrap,” Perry says. “We thought it would take that much, but you just never know.”

Loadcraft had been using an airless spray system, but after examining several different options settled on Kremlin Rexson Cyclomix system (manufactured by EXEL North America) that automatically mixes the paint and reduces excess waste.

EXEL North America rep Tom Dean at EAH Equipment (Austin, TX) helped install a system for two spray booths for the primer and topcoat, as well as a dual gun management system for a pair of spray guns in each booth.

Dean says the new set-up cuts down Loadcraft’s waste by more than 30%, and estimates the savings to the company at about $100,000 annually.

“Loadcraft had calculated their wa based on the mixed material that was left over from hand mixing,” he says. “They were also spraying with conventional and airless application equipment. We also have the ability now to record actual usage on A side, B side and solvent material being sprayed. We have no left over mixed material besides what is in the hoses to be flushed.”

The Kremlin Rexson Cyclomix Expert can manage up to 24 components (bases, catalysts, flushing solvents), and can handle mono, bi- or tri-component materials. The machine is programmed on a color screen with ratio/tolerance data assist management to monitor material consumptions.

By properly handling the mix, Loadcraft also reduced its VOC output, Dean says.

“We also reduced the solvent flush cycles,” he says. “They now use 50 feet of ¼-inch hose versus large high-pressure pumps and pressure pots that required a large amount of solvent.”

Loadcraft opted for automatic flush boxes which are located in the spraying area, close to the painter so that it enables the person to be hands free while system is flushing.

Perry says having the system programmed to run according to designated specifications is a time saver, as well as a money saver.

“To have it all tied back into a computer is really helpful,” he says. “We had to learn the little tips and tricks to get it set up right, but it went very smoothly.”

Loadcraft specializes in design and manufacturing of 250-2000 horsepower drilling and work over rigs, as well as trailers, dollies, beams, and multi-axle components to support the heavy haul and oilfield transportation industries.

Since McIver brought the company out of bankruptcy, the facilities have expanded to include everything from a machine shop, three weld production lines, an on-site testing area, a vast warehouse and an indoor assembly area.

The company’s equipment can be found anywhere from the San Juan Basin in New Mexico to the deserts of Oman. In the past several years, more than 130 rigs and close to 900 trailers have been shipped to Argentina, Columbia, Kuwait, Chad, Egypt, Turkey, Mexico, Libya, Venezuela, India, Ecuador, Russia, Turkmenistan, Belarus, Kazakhstan and Iran.

That means the paint finish needs to last, especially in 130˚ heat in the Middle East.

“We’ve had good results with the finish so far,” Perry says.

Dean says he can see a better finish with his company’s Kremlin Rexson Airmix Atomization system than the old method Loadcraft was using with airless and conventional spray.

“With airless, the high pressure method would create a dull overall finish due to the lower atomization characteristics of airless spray,” he says. “The Airmix Atomization delivers the material at a very low velocity of 2 ft/sec versus 4 ft/sec with airless and 30 ft/sec with conventional.”

Dean says the Airmix uses a specially designed aircap to provide a smooth and even finish.

“The aircap helps to evenly atomize the paint as it leaves the fluid tip,” he says. “The even atomization allows the paint to be broken down into smaller particles, which provides the best coat with minimal defects or orange peel.”

For more information on EXEL North America products, please call 800-573-5554 or visit www.kremlinrexson-sames.com


Trailer Body Builder Magazine Talks NESHAP 6H EPA Paint Compliance for 2011

Trailer Body Builder Magazine is a great site and a magazine in the truck and trailer markets. Great market information and trending available through these guys. They had an article in their Jan 2011 issue highlighting the NESHAP 6H EPA paint rule that is going into effect in March. Read more at their site http://trailer-bodybuilders.com/mag/companies-until-march-0101/


Caskets, Yeah, We’ll Paint Those Too

It’s not Halloween, but what better holiday than New Year’s to start painting caskets around here. Whether you need to paint a casket, or anything else like a casket, with a robot or by hand, we have the right spray application equipment and paint delivery systems for the job. Yes, even caskets get a nice class A Finish to their surface. Wood caskets or metal caskets, you name, we’ll paint it. You can use air assisted airless Kremlin Rexson manual spray guns or even SAMES electrostatic bells and electrostatic spray guns. Some caskets are painted with plural component materials and the components are automatically mixed with our Cyclomix Expert Metering system. To get the best quality though, we decided to do the entire system ourself so our customer only had to do 1-Stop shopping. No better way to start the year off than shipping in some caskets for painting.